Page 1 of 1
Wiring harness routing.
Posted: Mon May 11, 2015 9:06 pm
by Bucko
Finally putting the TRX back together and although I took a few photos of the wiring harness routing before I stripped the frame down im not sure im getting the installation right, has anyone got any ideas where I could see some photos or diagrams for the correct route, any help much appreciated, thanks Steve.
Re: Wiring harness routing.
Posted: Mon May 11, 2015 9:22 pm
by Rich
if you download the manual I think the routing is all in there.
Re: Wiring harness routing.
Posted: Mon May 11, 2015 10:00 pm
by Bucko
Thanks for that, also do you know if the coils mount inboard on the brackets or outboard , it looks like they go on the inside but all the pictures ive seen and access to the mounting screws seems to suggest they mount outboard of the brackets?
Re: Wiring harness routing.
Posted: Tue May 12, 2015 11:27 pm
by FANDANGO
Outward, bolt goes through coil and then thread on the mount. Put the connections to the coil first, fiddley is word I would use...
Re: Wiring harness routing.
Posted: Wed May 13, 2015 7:19 pm
by Rich
FANDANGO wrote:fiddley is word I would use...
I think you are being very restrained there - well done.
Certainly not the word I would use
!