Lower yoke stem

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
ac@39
Site Sponsor
Posts: 162
Joined: Tue Sep 10, 2013 7:57 pm
Location: Neath - South Wales

Lower yoke stem

Post by ac@39 » Sun Apr 12, 2015 3:34 pm

have had a look but cant find the specific specs for the trx lower yoke stem ... have removed stem from what i believed to be a standard lower yoke only to notice that the top yoke is marked 4jh y-1 correct me if i'm wrong.. but fzr600?

couldnt find any markings on lower yoke so want to be 100% sure i have correct stem, so if any one can point me to or tell me the correct length/diameter would be great as was wanting to get spacers made up to fit into rsv lower yoke --

:D
inspired by san miguel

User avatar
SDN
Site Sponsor
Posts: 760
Joined: Sat Jan 23, 2010 2:26 pm
Location: Birmingham

Re: Lower yoke stem

Post by SDN » Sun Apr 12, 2015 10:07 pm

There are several diameters - there is a drawing somewhere on the site I believe. If you aredespate I may be able to do a sketch - I am in the process of modify a stem at present

cobbadiggabuddyblooo
Site Sponsor
Posts: 6809
Joined: Thu Aug 28, 2008 9:19 am
Location: Brisbane,Australia

Re: Lower yoke stem

Post by cobbadiggabuddyblooo » Mon Apr 13, 2015 6:53 am

4JHY-1 is correct for the top TRX tree.
STEM DIAMETER 30mm at the base where pressed into the bottom tree and total length around the 277mm mark.

30mm offset from c of stem to centre of forks
laughter is the best medicine

ac@39
Site Sponsor
Posts: 162
Joined: Tue Sep 10, 2013 7:57 pm
Location: Neath - South Wales

Re: Lower yoke stem

Post by ac@39 » Mon Apr 13, 2015 11:09 am

Thanks guys.. Will check stem I have see where I'm at
inspired by san miguel

Post Reply