TDM CLUTCH CABLE...WHICH ONE ?

[bubbaad]

I ordered one 1991-2001 and it's wrong. Have searched on here but can't find out which cable to order
4tx3...4tx4....ect.
HELP !

[M.V.]

For the TRX or the TDM?

The part number for the TRX one is 4NX-26335-00, there's a parts manual in the d/l section.

If it's the TDM, 3VD-26335-01-00, which is used on 92-93 model, that's about as far as my gooling will take me...

What's the part number of the one you ordered?

[bubbaad]

I'm putting bars on my TRX (dodgy back) and need a longer cable....Sorry for the confusing post.

[M.V.]

Oh, I see. I'm pretty sure it's been covered here, someone who's knows should be along soon.

Edit: found it, here ya go: http://www.trx850.com/phpBB_forum/viewt ... 50&p=55234

[sherlock]

I'm sure the late model XJ900 diverions ('98) one is the same but 100mm longer

[Mincehead]

Yep the Divvy 9 or any of the 850 TDM cables will work and are longer, giving enough length for the straight bars.
I`m not sure the TDM900 cable will fit but I`m guessing it would.

[Gix]

This is the one I bought and it works.... http://www.ebay.co.uk/itm/260978969880

FWIW, I originally bought a divvy 900 one and it was no good as it went from the lever into a solid arced metal sleeve and fouled everything

[bubbaad]

The one I was sent has the arched bracket and is useless.....All this mither just to fit a set of bars I remember the 80s when I was into the mk2 escorts, cortina's and fiesta's and you could just turn up at a scrapyard and climb about the junkers and remove the bits and pieces you needed......