Yamaha TRX850 Enthusiasts Forum

which dynatek coils do you install on the rex.
i done a search and found people using dc3-1(3.0ohms) but would the dc10-1 (5.0ohms) be more suitable?
any ideas.

zenridaz wrote:which dynatek coils do you install on the rex.
i done a search and found people using dc3-1(3.0ohms) but would the dc10-1 (5.0ohms) be more suitable?
any ideas.

I run the 3´s without any probs. Closest match for the TRX´s resistant

what other coils with 5.0 ohms output would be suitable?
for eg, from other bikes.
those dynateks are pretty expensive.its around $300 with the leads,so im thinkin denso gotta have something that matches.

looks like im gonna buy dyna's

has anyone installed the 5.0 ohms

will i blow up the cdi buy doing this

im sure i read something on here about doing this but couldnt find it in a search.

any advice mucho's gracious.

i also use 3ohm dynateks.

I honestly couldnt comment about "blowing things up" as i didnt look into it too much. 3ohm work, and work well, so why screw around with anything else and run the risk of damage ?

It took me about 4 weeks of constant looking and ringing to find a decent price, but i saved myself $150AUD in doing so. So shop around.

yeah i was talking to a mechanic who said dont use the 5.0 as it wont run right.

ive only got 1 quote so far from mca ,just weighing up weather to buy them from uncle sam
damn i should have bought them a few months ago.

thanks for the feedback Quan.

i mainly got these because they are controllable. I can set dwell and offload times, aswell as charge state. The stock ones, as i found out, dont really do squat.