Wilbers fork springs. Setup?
Posted: Fri Nov 10, 2006 11:12 am
So, finally gave in and got myself a new set. Much needed upgrade that...
Question is, anyone here with experience from these Wilbers? What oil grade to use, how much and what settings to start adjusting from? Wilbers recommend 10w and 140 mm air but I'm counting on that being a "soft" setting for allround use, I need something more stable and sensitive for track use.
Have been running the "TRX-files mod" on my standard forks so far which made things better than standard, will it be a good policy to start from with the new springs?
BTW, anyone know how to cure oil leek from the rebound adjuster at the top? Put a new O-ring in when I changed the oil last time but that didn't help much. Something further down in the fork needs changing?
Question is, anyone here with experience from these Wilbers? What oil grade to use, how much and what settings to start adjusting from? Wilbers recommend 10w and 140 mm air but I'm counting on that being a "soft" setting for allround use, I need something more stable and sensitive for track use.
Have been running the "TRX-files mod" on my standard forks so far which made things better than standard, will it be a good policy to start from with the new springs?
BTW, anyone know how to cure oil leek from the rebound adjuster at the top? Put a new O-ring in when I changed the oil last time but that didn't help much. Something further down in the fork needs changing?