Yamaha TRX850 Enthusiasts Forum

just scored a new yzf R6 1999-2000 front master cylinder.. Does anyone know weather the std TRX lever fits onto the R6 masters

Pretty sure it fit's that year one Cobba

yer was hoping it would, Thanks Kev.... sort of makes sense, you think they would use the same cast and just change the bore size to suit..

For anyone that does a lot of track days and do not want the expense of Pazzo levers getting broken. Especially for those who have gone over to using R1 / 6 master cylinder and clucth posts:

http://www.ebay.co.uk/itm/230644657367? ... 1423.l2649

A good price and looks to be very good quality too.

I recently fitted an R1 master cylinder with the original brake lever and it all fitted perfectly.

The two master cylinders appear identical externally.

Nice lookin lever mince.. seem good value for the pair for the price. Oddly enough the master i shopped around for came from U.K.$62 /$15 postage

Yes I`ve seen R1 / 6 MC`s go here for 15 quid Cobba, without the levers of course.
Those levers being folding types are definately worth investing in if you do a lot of track days.

This ones brand new
http://www.ebay.com.au/itm/330636389286 ... 1438.l2649

Yep, you can`t go wrong at that price either.
I`m guessing at least 100 quid if you ordered one from Yamahahahaha direct.

yer here's some other ones I found the other month... new
http://www.ebay.com.au/itm/370263846008 ... 1438.l2649

cobbadiggabuddyblooo wrote:yer here's some other ones I found the other month... new
http://www.ebay.com.au/itm/370263846008 ... 1438.l2649

It's interesting the part number begins with 3TJ (FZR400RR), which used a 5/8" master cylinder, and the seller is listing it as suitable for 'FZR1000 YZF R1 R6' - the FZR1000 used a 5/8" m/c too.

The main problem to fitting miss matched levers is to be sure that the lever actuating point on the master cylinder is right in the middle of the master piston spigot[ or rod]..if the push to brake is off to one side, it will cause a notchy creep feel on stopping...you could use anything in the lever itself...as long as it pushes into the middle of the master..

found some of those levers just like minces link on e bay over in W.A. for $90 odd for the pair and some R6 std levers for $6 just like the TRX 4point adj. fishing on e bay...

i received my '04 R6 master today.
the std TRX lever slots straight in like a bought one.
i will take pix and edit this post l8tr.
cheers
fung
uses the same pivot bolt and the stop switch is also identical.
cheers
fung

BUMP

fung wrote:i received my '04 R6 master today.
the std TRX lever slots straight in like a bought one.
i will take pix and edit this post l8tr.
cheers
fung

15112011 (Large).jpg

15112011(006) (Large).jpg

15112011(003) (Large).jpg

uses the same pivot bolt and the stop switch is also identical.
cheers
fung