Acewell issue
Posted: Sun Jul 01, 2012 6:43 pm
Hi!
Got my Acewell 3251 and have started to connect the cables on the bike.
Easiest first I thought. Indicators (right and left) is ok, high beam is ok and
the Clock is connected to the batterys + and is ok.
But I have trouble with the neutral, it wont light up. Tried putting a gear in but same.
Acewell has the grey cable for the neutral and TRX has light-blue.
Acewell also says there should be a unique GND for the neutral. TRX gauge has a brown cable
with som black spots on it which seemes to be this GND but where/how to connect it.
How have you connected the neutral cables that has an Acewell?
Pic shows how wiring should be done for the neutral.
Got my Acewell 3251 and have started to connect the cables on the bike.
Easiest first I thought. Indicators (right and left) is ok, high beam is ok and
the Clock is connected to the batterys + and is ok.
But I have trouble with the neutral, it wont light up. Tried putting a gear in but same.
Acewell has the grey cable for the neutral and TRX has light-blue.
Acewell also says there should be a unique GND for the neutral. TRX gauge has a brown cable
with som black spots on it which seemes to be this GND but where/how to connect it.
How have you connected the neutral cables that has an Acewell?
Pic shows how wiring should be done for the neutral.