Page 1 of 1

cable quality

Posted: Mon Jun 03, 2013 4:51 pm
by andyaber
Putting bars on the bike so went shopping the other day for tdm850 throttle and clutch cables.

Went to a big mail order place and asked if they did different qualities.

No just one type.

Are they oem type or cheapies I asked.

Cheapies I was told and if I want the best then buy Yamaha ones.

I was going to ring Venhill or Wemoto.

Any comments on quality etc much appreciated.

Cheers, Andy.

Re: cable quality

Posted: Mon Jun 03, 2013 5:02 pm
by Mincehead
Venhills, as good, if not better than original spec stuff. :wink:

Re: cable quality

Posted: Mon Jun 03, 2013 8:03 pm
by andyaber
Thanks Mince, didn't fancy Yamaha prices.

Re: cable quality

Posted: Mon Jun 03, 2013 8:17 pm
by Snod Blatter
Venhill will want an arm and a leg, think £70 for a couple of normal (i.e. nylon lined, not teflon) throttle cables. Have you checked ebay for NOS originals?

Re: cable quality

Posted: Mon Jun 03, 2013 8:46 pm
by dixonj
Got mine from wemoto and well happy with them.

Re: cable quality

Posted: Tue Jun 04, 2013 8:25 am
by Mincehead
Snod Blatter wrote:Venhill will want an arm and a leg, think £70 for a couple of normal (i.e. nylon lined, not teflon) throttle cables. Have you checked ebay for NOS originals?
Erm actually NO:

http://www.venhill.co.uk/Hoses_&_Cables ... HA/?page=5

And, they`re ALL PTFE lined too:

http://www.venhill.co.uk/Hoses_&_Cables_-_Custom

http://www.venhill.co.uk/Hoses_&_Cables ... tom_Cables

Venhill`s kit is quality, used them since the 1970`s, wouldn`t use anyone else either.

Re: cable quality

Posted: Tue Jun 04, 2013 12:37 pm
by SDN
Mincehead wrote:
Snod Blatter wrote:Venhill will want an arm and a leg, think £70 for a couple of normal (i.e. nylon lined, not teflon) throttle cables. Have you checked ebay for NOS originals?
Erm actually NO:

http://www.venhill.co.uk/Hoses_&_Cables ... HA/?page=5

And, they`re ALL PTFE lined too:

http://www.venhill.co.uk/Hoses_&_Cables_-_Custom

http://www.venhill.co.uk/Hoses_&_Cables ... tom_Cables

Venhill`s kit is quality, used them since the 1970`s, wouldn`t use anyone else either.
I have used Venhill stuff, it is very good, much cheaper than OE stuff and you can make it any size you like. I made a set of custom cables up for my FCRs and used Venhill components to repair my original throttle cable worked a treat

Re: cable quality

Posted: Tue Jun 04, 2013 1:54 pm
by Snod Blatter
Alright then, I retract my Venhill-based insults. I was going by a quote given to me by a local dealership who are a recognised Venhill stockist, I wanted a pair of throttle cables for a Honda CBX250RS as they don't exist. I was told it'd be around £70 after sending my originals off, them making up some replicas and then sending them back.

In the end David Silver got some NOS cables in for about £12 each..

Re: cable quality

Posted: Tue Jun 04, 2013 4:23 pm
by andyaber
Phoned Fowlers at Bristol
Clutch cable £21.50
Throttle cable £35.38
both plus vat and back order so 3-4 days from yamaha.

Phoned Venhill, not kept as std but will make them using teflon & stainless stuff
Clutch cable £42
Throttle cable £54
both plus vat

Wemoto have wildly varying prices from website to ebay so i'll phone them tomorrow maybe.

Re: cable quality

Posted: Wed Jun 05, 2013 10:05 am
by andyaber
Phoned Wemoto
Clutch cable £9.95
Throttle cable £34.39
for pretty std not teflon or anything stuff.

Tempted to go for Yamaha throttle cables at that price difference are all mk2 tdm's the same?

edit: 2-3 weeks wait for yamaha.

Just ordered from Wemoto.

Re: cable quality

Posted: Wed Jun 05, 2013 11:22 am
by kevj
I have been looking for a speedo cable for mine. My speedo cable is 119 cm long as the the front is raised quite abit. I contacted a company in Nottingham called Cable Tec and they have made me one and sent it to me in less 48 hrs and it only cost £15!!!