Replacement Clocks

phil_inglis · Post by **phil_inglis** » Mon Feb 20, 2012 8:36 am

Hi Folks,

I'm assisting my old mate to do a front end conversion on his 1996 TRX; Current we have replaced the top yoke, fitted renthal bars and also fitted headlight fairing brackets.

The clocks on the bike are a little wide for the raptor style fairing he has bought; any suggestions as to what gauges to buy that would directly plug into the existing loom?

Rsvp, Phil.

MadAd · Post by **MadAd** » Mon Feb 20, 2012 9:55 am

If your looking for narrow clocks look Buel but I doubt they are a direct plug in!!
Can't think of anything that would just plug in that is not the same size or bigger than you already have!!

Would be interested to here if you manage to sort anything.

You may need to head down the rout of buying after market enduro digital type of clocks!!

phil_inglis · Post by **phil_inglis** » Mon Feb 20, 2012 1:54 pm

Yeah, it may mean we need to take the gauges out of their housing and make up a alloy dash for them to fit in.

Thanbks for the reply!

Bullet · Post by **Bullet** » Mon Feb 20, 2012 3:28 pm

Don't know for certain but wouldn't an early R1 digital clock work, as this is the front end most TRX's change to?

fung · Post by **fung** » Mon Feb 20, 2012 8:43 pm

don't R1 digital run off the countershaft sprocket?
cheers
fung

sadmansteve · Post by **sadmansteve** » Wed Feb 22, 2012 12:00 am

Have a look at this thread?

http://www.trx850.com/phpBB_forum/viewt ... 645#p56645

Yamaha TRX850 Enthusiasts Forum

Replacement Clocks

Replacement Clocks

Re: Replacement Clocks

Re: Replacement Clocks

Re: Replacement Clocks

Re: Replacement Clocks

Re: Replacement Clocks