Hi all, new member. Live in Perth West Australia. Ride Norton, ironhead harley and TRX 850. Quite like the TRX .... I was toying with the idea of making a two into two exhaust, using dunstall reverse cone megaphones, both on the right side. Bit old school maybe but I am "from that era" Anyone out there done anything similar. ?? The headers on mine appear stainless but a little hard to tell.. the bike was pretty neglected when I bought it.. its had a hard life ... are the header pipes stainless as standard??
thanks all
custom exhaust questions
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
phuk72
- Site Sponsor / Administrator
- Posts: 3522
- Joined: Thu Jan 06, 2005 1:47 pm
Re: custom exhaust questions
welcome
standard headers are stainless and clean up well with a bit of elbow grease. they also restrict gas flow (big bend at head) but this is only an issue if you want more power.
nobody does a 2 into 2 (exiting same side) but should be fairly simple to cut standard pipes and fab some links
good luck
standard headers are stainless and clean up well with a bit of elbow grease. they also restrict gas flow (big bend at head) but this is only an issue if you want more power.
nobody does a 2 into 2 (exiting same side) but should be fairly simple to cut standard pipes and fab some links
good luck
-
Black99
- TRX-Enthusiast
- Posts: 1
- Joined: Wed May 04, 2011 2:18 pm
Re: custom exhaust questions
Better late than never but Pipemaster in Qld make one.
-
cobbadiggabuddyblooo
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: custom exhaust questions
I was lookin at Kims bike the other day up here in Brissy. He has a set up just like that with both pipes on one side. There's a set of std pipes on e bay over WA at present ..good to chop and do what you want to...http://www.ebay.com.au/itm/YAMAHA-TRX85 ... 43af91e2f6
laughter is the best medicine