Is a QA throttle needed..........?

Wombat · Post by **Wombat** » Mon Apr 18, 2011 7:10 am

when you fit FCRs?
Domino?
What do other people use?

Bob

bobtrx · Post by **bobtrx** » Mon Apr 18, 2011 11:52 am

Bob when I did mine I used the standard cables. I only used one cable and did one complete circle of the cable wheel on the carby to use up the longer inner cable. The return cable was disconnected from the wrist grip end and cable tired out of the way at the carby end. Never had any problems in 30k and if in the unlikely event the carby locks open etc you have a kill switch to play with.

Wombat · Post by **Wombat** » Tue Apr 19, 2011 6:40 am

Ta Bob. That's good to know

Bob

JL · Post by JL » Tue Apr 19, 2011 1:05 pm

The set I bought came with cables and I fitted them straight to the standard throttle sleeve....

Getting back on the road now?

trixynut · Post by **trixynut** » Tue Apr 19, 2011 9:17 pm

I wouldnt fit a QA throttle with FCRs as it will cause them to 'bog down' when you crack it open.

FCR's like it slow and smooth to start with .................. but then again, don't we all!

Wombat · Post by **Wombat** » Wed Apr 20, 2011 7:27 am

JL wrote:The set I bought came with cables and I fitted them straight to the standard throttle sleeve....

Getting back on the road now?

Nah, still in the shop getting repaired and waiting for parts from Japan.
Probably the other side of Easter.
Go past the shop everyday on the way home, afraid to go in there til she's finished
Even getting the tank painted.

Bob

Yamaha TRX850 Enthusiasts Forum

Is a QA throttle needed..........?

Is a QA throttle needed..........?

Re: Is a QA throttle needed..........?

Re: Is a QA throttle needed..........?

Re: Is a QA throttle needed..........?

Re: Is a QA throttle needed..........?

Re: Is a QA throttle needed..........?