Flatslide carb. advice needed

[thch]

Hi Mincehead.
Well thank you for the information - I had the idea that this was the real thing.
Would have been p*ssed off to receive a 1000 euro replica!
I keep on learning

[Tarwetijger]

Hi tarwetijger.
Looks like we almost have the same setup, only the headers/airfilters differ.

Yer, here's more info of what I did:
viewtopic.php?f=5&t=5134&start=60

Since you're located in Holland, do you have any knowledge of CMS?

Only heard stories of them; expensive, they're very slow or don't deliver at all.
Never ordered anything there, the most interesting stuff for my bike comes from ebay and out of the ... UK!
I kid you not!

[Marty Moose]

I'm only getting 87 at the rear wheel with the FCR's and open exhaust but 100,000k's on the clock and the heads never come off the bike. Still running std 150 main jet just lifted the needle a notch and changed the pilot air I think to accomidate the bellmouths. I'm sure if I changed the headers and rebuilt the head I'd get close to that magical 90

You running the std airbox ??

[cobbadiggabuddyblooo]

No airbox to restrictive... running the blue bellmouths and made up a copy of a ramair twinsock filter myself. it's just an aftermarket locally produced largebore 2 into 1 system

[cobbadiggabuddyblooo]

. it's just an aftermarket locally produced largebore 2 into 1 system

The exhaust that is

[Mincehead]

2 into 1 large bore?
I`m surprised you didn`t turn that into something smutty cobba.

[cobbadiggabuddyblooo]

LISTEN TO THE WORD OF BRIAN Yes I've seen the light.. come for a ride with the Satan's Slayer's