Yamaha TRX850 Enthusiasts Forum

I've just purchased one locally for $60NZD (about 20GBP) - I know it mounts up fine, but will I need to modify the wiring loom and plugs? I don't pick my TRX up for another week so can't tell by looking

redkiwi wrote:I've just purchased one locally for $60NZD (about 20GBP) - I know it mounts up fine, but will I need to modify the wiring loom and plugs? I don't pick my TRX up for another week so can't tell by looking

I´ve cut the standard plug off....soldered the cables together and then the projector has a dual cabling...voila...

You dont have to modify any wiring just push out the connector spades from the TRX connector block and plug them directly into the FZR one.....simples,5 min job,at least it was on mine.

Millsy wrote:You dont have to modify any wiring just push out the connector spades from the TRX connector block and plug them directly into the FZR one.....simples,5 min job,at least it was on mine.

Strange, mine where not the same size

Killerwhale wrote:

Millsy wrote:You dont have to modify any wiring just push out the connector spades from the TRX connector block and plug them directly into the FZR one.....simples,5 min job,at least it was on mine.

Strange, mine where not the same size

nor was mine

there are some differences across the range as I have discovered to my detriment