My YZF swinger....

Killerwhale · Post by **Killerwhale** » Fri Jul 04, 2008 6:27 pm

Ok, so the dude selling it said it was bolt on but of cource the sprockets did not line up...fekker...

So with limited tools i used a flex cutter (free translation) and made a 6mm distance for the front sprocket and all good....although crude...

Question, should you keep it this way or machine anything alse??

...big blob of loctite on that nut now!!

slow codger · Post by **slow codger** » Sat Jul 05, 2008 5:49 pm

Did you move the sprocket out by 6mm?, and If so did you not try turning the rear sprocket around. What is a flex cutter?

Dave E

Killerwhale · Post by **Killerwhale** » Sat Jul 05, 2008 8:05 pm

slow codger wrote: Did you move the sprocket out by 6mm?, and If so did you not try turning the rear sprocket around. What is a flex cutter?

Dave E

WouldnÂ´t do any good turning a flat sprocket around now would it!?

....a round disc spinning as fekk cutting metal....itÂ´s called "flex" in Swedish

youngy · Post by **youngy** » Sat Jul 05, 2008 8:07 pm

ah....a disc cutter.

Killerwhale · Post by **Killerwhale** » Sat Jul 05, 2008 8:08 pm

youngy wrote:ah....a disc cutter.

WTF....

youngy · Post by **youngy** » Sat Jul 05, 2008 8:14 pm

an angle grinder

Killerwhale · Post by **Killerwhale** » Sat Jul 05, 2008 8:34 pm

youngy wrote:an angle grinder

ThatÂ´s it!

slow codger · Post by **slow codger** » Sun Jul 06, 2008 6:52 pm

My rear sprocket is dished, so turning it round makes it nearer the wheel.

Dave E

Killerwhale · Post by **Killerwhale** » Sun Jul 06, 2008 7:02 pm

slow codger wrote: My rear sprocket is dished, so turning it round makes it nearer the wheel.

Dave E

Do you know wich brands is? ....iÂ´ve used renthalÂ´s last two times and theyÂ´re flat....

slow codger · Post by **slow codger** » Sun Jul 06, 2008 7:05 pm

Was on the original wheel, however I believe trixynut had dealt with dished discs before.
Will look tomorrow, as got to work now.

Dave E

Killerwhale · Post by **Killerwhale** » Sun Jul 06, 2008 7:09 pm

slow codger wrote: Was on the original wheel, however I believe trixynut had dealt with dished discs before.
Will look tomorrow, as got to work now.

Dave E

I know that the stock disc is dished but i donÂ´t want to be locked to a 39 one...BUT if that makeÂ´s me able to screw in the front sprocket nut i guess itÂ´s worth it....

youngy · Post by **youngy** » Sun Jul 06, 2008 8:39 pm

Kedo sprocket is dished, I reckon.

trixynut · Post by **trixynut** » Mon Jul 07, 2008 10:58 am

Only sprocket I could find with a recess to allow flipping to move it inwards was AFAM. They do a standard TRX one, plus a 39? tooth one for the TDM900 which fits.

Killerwhale · Post by **Killerwhale** » Mon Jul 07, 2008 11:55 am

trixynut wrote:Only sprocket I could find with a recess to allow flipping to move it inwards was AFAM. They do a standard TRX one, plus a 39? tooth one for the TDM900 which fits.

Top!!

IÂ´ve been looking at some pictures of the swinger as well....it seems as many has the nut on the opposite side to the TRX...does that make any difference?

steve speed · Post by **steve speed** » Mon Jul 07, 2008 1:51 pm

IÂ´ve been looking at some pictures of the swinger as well....it seems as many has the nut on the opposite side to the TRX...does that make any difference?

i cant see how it can

Yamaha TRX850 Enthusiasts Forum

My YZF swinger....

My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....

Re: My YZF swinger....