FZR250/400 Projector Beam headlight

[redkiwi]

I've just purchased one locally for $60NZD (about 20GBP) - I know it mounts up fine, but will I need to modify the wiring loom and plugs? I don't pick my TRX up for another week so can't tell by looking

[Killerwhale]

I've just purchased one locally for $60NZD (about 20GBP) - I know it mounts up fine, but will I need to modify the wiring loom and plugs? I don't pick my TRX up for another week so can't tell by looking

I´ve cut the standard plug off....soldered the cables together and then the projector has a dual cabling...voila...

[Millsy]

You dont have to modify any wiring just push out the connector spades from the TRX connector block and plug them directly into the FZR one.....simples,5 min job,at least it was on mine.

[Killerwhale]

You dont have to modify any wiring just push out the connector spades from the TRX connector block and plug them directly into the FZR one.....simples,5 min job,at least it was on mine.

Strange, mine where not the same size

[phuk72]

You dont have to modify any wiring just push out the connector spades from the TRX connector block and plug them directly into the FZR one.....simples,5 min job,at least it was on mine.

Strange, mine where not the same size

nor was mine

there are some differences across the range as I have discovered to my detriment