TRX850 Adjustable Ride Height Dog Legs - jack up & lower kit

[darayman]

I've just fitted a set of adjustable dog legs, made fine tuning the rear end a lot easier.

The YZF750 dog legs that were fitted when i bought the trx had me on tippy toes.

I've set the new dog legs to just a couple of mm longer than standard.

I can now get a foot flat on the ground.

There is a progressive spring on the standard shock which has either had an easy life, which i doubt or has been serviced at some point and works well in keeping my ample frame in the saddle.

[Mincehead]

by the colour I deduce it`s a Hyperpro progressive spring too.They REALLY know their TRX`s and were the guys behind one of the most famous, the Troll:

http://hyperpro.com/index.asp?page=hyperbike

http://www.carolenash.com/insidebikes/b ... hyper-pro/

Nice adjustable dog bones too.

[darayman]

I made the set up myself. They are adjustable from 170mm to 190mm. And can be adjusted whilst on the bike due to reverse threaded rosejoints.

The kit comprises of 2 shafts, 4 rosejoints, 4 nuts, 4 washers, 2 longer bolts and 2 nylock nuts and cost me £58.60.

[Mincehead]

Yep nicely done, I`ve got ride height adjustment on my Ohlins shock so don`t require the facility of adjustment via the dogbones.
You may find other members requesting of you to make some for them though.

[darayman]

No worries, if anyone wants the adjustable dog legs let me know.
If your local (M1 J25/26) pop round for a cuppa and have a look.

[Mincehead]

I used to be local, well up to 1991 but now live in Edinburgh.I do get down south quite a bit though, lots of biker pals still down there.
You might get a wee raid one of these days.

[megatronics]

hi there looks good mate. fancy selling your yzf ones?