levers and rearsets

schmiffee · Post by **schmiffee** » Tue Mar 01, 2011 10:53 pm

Could the piccy's be put back up for us considering this mod please.....

amiciangelo · Post by **amiciangelo** » Thu Mar 03, 2011 10:45 am

Hi, I wanted to know if the clutch and brake levers of the TRX 850, are compatible with the R1 1998 to 2003, because in Italy I found a company that makes the levers (called Performance Technology) and am interested in buying the model EVO II, but I need to know their compatibility ', thanks. Greetings

from Italy.

rbaron25 · Post by **rbaron25** » Sat Mar 19, 2011 4:38 am

Brakes perfect fit, clutch I used 3 or 4 ... stainless washers.

And if you not mechanically minded.... I did it so you would have to have two feet where your hands should be not to even have have a chance and even then it should be possible

Post by **Kevtrx849** » Sat Mar 19, 2011 5:35 am

I reloaded the piccy back on page 2 Victor. And yes Allen head bolt in mild steel with ordinary nut.

rbaron25 · Post by **rbaron25** » Sat Mar 19, 2011 12:05 pm

Thanks legend

rbaron25 · Post by **rbaron25** » Sat Apr 02, 2011 2:24 am

Bobbins on, touchwood no crashes to see if they work

Post by **Kevtrx849** » Sat Apr 02, 2011 4:13 am

C'mon, you've gotta test em out

Post by **Mincehead** » Sat Apr 02, 2011 2:05 pm

Found some good looking and bl**dy cheap universal rearsets on Ebay:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

And their main site:

http://shop.ebay.co.uk/ninadoes_narsuri ... 4340.l2562

Can`t remember what hole centres the TRX mounting points are, so you`ll need to measure them up and contact that seller to clarify which model you want.

JW-TRX · Post by **JW-TRX** » Sat Apr 02, 2011 3:40 pm

You still happy with your levers RedBaron?

I'm considering for me and my girls bike

rbaron25 · Post by **rbaron25** » Sun Apr 03, 2011 11:30 am

Very happy mate very happy. Think with a bit of knowhow and engineering you could get a better fit on the clutch with something custom machined. Fung noticed a bit of freeplay up and down in both levers but going to tighten up the bolts to sort that out tomorrow.
Look fantastic not reaching now

job done and sorted

JW-TRX · Post by **JW-TRX** » Sun Apr 03, 2011 12:07 pm

Awesome. It's not that expensive. Paid half of that for OEM clutch lever. (Just for a broken off tip

)
Looks awesome.

Scotty · Post by **Scotty** » Thu Apr 21, 2011 4:09 am

Got levers from the same place, really cheap, quick posting too.
Front brake straight fit no problems at all.
For the clutch i replaced the original bolt/pin with one from my dirt bike (larger diameter sleeve bit) it fitted perfectly, then brass washers top and bottom to remove the vertical freeplay and now perfect!

gregs656 · Post by **gregs656** » Thu Apr 21, 2011 11:03 am

glad I spotted this as I need a new set of levers, and pegs. I wonder why the 50mm spaced rear sets are so much more expensive than the 80?

Post by **Mincehead** » Thu Apr 21, 2011 7:57 pm

As they are CNC`ed it`s likely down to production costs against pairs sold that`s all, materials wise there will be nothing in it.

gregs656 · Post by **gregs656** » Thu Apr 21, 2011 9:49 pm

yes tht makes sense I suppose. I'm tempted, doesn't seem to be much out there about them on the web though.

Yamaha TRX850 Enthusiasts Forum

levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets

Re: levers and rearsets