Rod
What's this?
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
Rod.s
- Site Sponsor
- Posts: 1404
- Joined: Sun Apr 25, 2010 11:01 am
- Location: Brisbane, Australia
What's this?
Ok i don't know every part of this bike...yet... so when i removed the radiator cap this fell on the floor, must have been held on by phantom glue. So if it's now on the floor then where did it come from
Rod
Rod
If it's not made in China, it's a fake!
-
schmiffee
- TRX-Enthusiast
- Posts: 497
- Joined: Sun Sep 28, 2008 1:15 pm
- Location: Gold Coast
Re: What's this?
It goes under the radiator cap and has a bolt that goes through the cap into the thread. It makes it harder to remove the radiator cap to tamper with the fluids...
Understeer - when you hit the fence with the front of the bike.
Oversteer - when you hit the fence with the rear of the bike.
Horsepower - how fast you hit the fence.
Torque - how far you take the fence with you.
Oversteer - when you hit the fence with the rear of the bike.
Horsepower - how fast you hit the fence.
Torque - how far you take the fence with you.
-
Rod.s
- Site Sponsor
- Posts: 1404
- Joined: Sun Apr 25, 2010 11:01 am
- Location: Brisbane, Australia
Re: What's this?
Thanks Mr Smith.schmiffee wrote:It goes under the radiator cap and has a bolt that goes through the cap into the thread. It makes it harder to remove the radiator cap to tamper with the fluids...
So I'm now missing a bolt! must have fallen off like all the other bolts that are missing, that, or there is a bolt thief in my aera
rod
If it's not made in China, it's a fake!
-
Mincehead
- TRX-Enthusiast
- Posts: 6345
- Joined: Sun Jan 25, 2009 1:40 pm
- Location: West Sussex
- Contact:
Re: What's this?
It`s not a critical part of the bike, mine hasn`t even got one but I guessed what it was when you mentioned radiator cap. Never even seen one before! 
LOUD PIPES SAVE LIVES
-
M.V.
- Site Sponsor
- Posts: 1509
- Joined: Sat Jul 04, 2009 3:23 am
- Location: Melbourne, Australia
Re: What's this?
Mine fell off a while ago... Must but some more locktite...Mincehead wrote:It`s not a critical part of the bike, mine hasn`t even got one but I guessed what it was when you mentioned radiator cap. Never even seen one before!
-
Rod.s
- Site Sponsor
- Posts: 1404
- Joined: Sun Apr 25, 2010 11:01 am
- Location: Brisbane, Australia
Re: What's this?
Yep I've been using 222 locktite on everything i touch on this bike, found out yesterday that one of the bolts holding the rear brake assembly (foot peg etc) had gone missing, now the new one and original are 222 onM.V. wrote:Mine fell off a while ago... Must but some more locktite...Mincehead wrote:It`s not a critical part of the bike, mine hasn`t even got one but I guessed what it was when you mentioned radiator cap. Never even seen one before!
Rod
If it's not made in China, it's a fake!
-
rbaron25
- Site Sponsor
- Posts: 744
- Joined: Thu Sep 23, 2010 7:34 am
- Location: South Queensland, Australia
Re: What's this?
I will give you all your bolts back if you let her go slowly with the $500 ransom...
I didn't see you...
Cause you didn't bloody look!
Cause you didn't bloody look!
-
fung
- Site Sponsor
- Posts: 1604
- Joined: Mon Aug 23, 2010 2:00 am
- Location: Gold Coast. South East Queensland.
Re: What's this?
remember to put it on so it holds tension against the cap undoing because it can be put on backwards.Rod.s wrote:Ok i don't know every part of this bike...yet... so when i removed the radiator cap this fell on the floor, must have been held on by phantom glue. So if it's now on the floor then where did it come from
Rod
cheers
fung
I WOULD RATHER WEAR OUT THAN RUST