FCR kit cost

Please share your secrets! What mods have you made to your TRX?

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
Marty Moose
TRX-Enthusiast
Posts: 58
Joined: Sat Apr 09, 2011 1:01 am
Location: Western Australia

FCR kit cost

Post by Marty Moose » Mon May 23, 2011 1:31 pm

So whats your best price that you have found for the FCR carb kit i.e with air box adapters cables etc etc. I just found one for $903 Australian dollars delivered is this cheap ??

Cheers
MM
Top
User avatar
Mincehead
TRX-Enthusiast
Posts: 6345
Joined: Sun Jan 25, 2009 1:40 pm
Location: West Sussex
Contact:
Contact Mincehead

Re: FCR kit cost

Post by Mincehead » Mon May 23, 2011 7:47 pm

VERY cheap, are you sure it`s for the complete kit? That`s under 600 quid!!!!! :shock:
So, around 400 quid cheaper than you can expect to pay elsewhere.
If it`s really for the whole kit and the TPS plate, cables etc, bite whoever`s selling them at that price`s arm off, I`m sure you`ll not be the only one when others notice this thread either. :wink:
LOUD PIPES SAVE LIVES
Top
Runehadding
TRX-Enthusiast
Posts: 9
Joined: Sun May 15, 2011 8:33 am
Location: Norway

Re: FCR kit cost

Post by Runehadding » Mon May 23, 2011 8:56 pm

Mincehead is right - I`m looking too... If this is for the kit - I want one too.
Top
Marty Moose
TRX-Enthusiast
Posts: 58
Joined: Sat Apr 09, 2011 1:01 am
Location: Western Australia

Re: FCR kit cost

Post by Marty Moose » Tue May 24, 2011 12:16 am

Yes this is for the kit cables adapters etc etc. $903au per set if I buy 3 sets, the best local price was 1083au per set. The other two pulled out and they held the price at 903 if I wanted for one kit. I was going to tell the local guy $1000au as I'd rather keep the business here if I can. I guess I had better place my order then I'll post up where to get em :)

Cheers
Marty
Top
User avatar
M.V.
Site Sponsor
Posts: 1509
Joined: Sat Jul 04, 2009 3:23 am
Location: Melbourne, Australia

Re: FCR kit cost

Post by M.V. » Tue May 24, 2011 1:23 am

Best price I found was PJM motorsports in the US, $799 for the carbs, $79 shipping & $75 for a jet kit, so with todays exchange rate... $907.21 AUD.
Top
Marty Moose
TRX-Enthusiast
Posts: 58
Joined: Sat Apr 09, 2011 1:01 am
Location: Western Australia

Re: FCR kit cost

Post by Marty Moose » Tue May 24, 2011 3:00 am

Thats where I got is from bit more that your price for the carb kit but I didn't get a jet kit. For those of you that think this is a good price they have two kits left then a long wait due to the earth quakes in Japan.
Papals exchnge rate is not the best so it was $928au delivered.


Cheers
Marty
Top
User avatar
Wombat
Forum Marsupial
Posts: 1092
Joined: Fri Jan 07, 2005 10:50 am
Location: Carlingford, Sydney, Australia

Re: FCR kit cost

Post by Wombat » Tue May 24, 2011 7:48 am

Gee I got mine at the right time then...........
Though I did pay about $100+ extra, but the AUD was lower than it is now.
Did I say I was a bastard? (private joke between me and MV)

Bob
"The fire is almost out......and there's nothing left to burn!"
Top
TRiXy
TRX-Enthusiast
Posts: 159
Joined: Mon Mar 10, 2008 12:07 pm

Re: FCR kit cost

Post by TRiXy » Tue May 24, 2011 1:06 pm

I'm sending them an e-mail now... Definitely keen, I need to pay for them now though, otherwise I might get cold feet #-o ...

If the $903 is a 'through you' special, then pencil me down... If I can get it direct, I will...

Cheers
Current Rides:
2010 YZF-R1 - Stock, but still awesome.
1995 Import Spec TRX - Yoshi Pipes & Jet Kit
Top
Marty Moose
TRX-Enthusiast
Posts: 58
Joined: Sat Apr 09, 2011 1:01 am
Location: Western Australia

Re: FCR kit cost

Post by Marty Moose » Wed May 25, 2011 12:29 am

Marty Moose wrote:Thats where I got is from bit more that your price for the carb kit but I didn't get a jet kit. For those of you that think this is a good price they have two kits left then a long wait due to the earth quakes in Japan.
Papals exchange rate is not the best so it was $928au delivered.


Cheers
Marty
Read the last line!
Top
User avatar
M.V.
Site Sponsor
Posts: 1509
Joined: Sat Jul 04, 2009 3:23 am
Location: Melbourne, Australia

Re: FCR kit cost

Post by M.V. » Wed May 25, 2011 2:36 am

Wombat wrote:Gee I got mine at the right time then...........
Though I did pay about $100+ extra, but the AUD was lower than it is now.
Did I say I was a bastard? (private joke between me and MV)

Bob

Bastard. I'll be doubly upset if I get no tax back & my dreams of FCR ownership go down the tube :lol:



Edit: Anyone keen on a group buy? PJM seems to be the best bet as it come with a jet kit...
Top
TRiXy
TRX-Enthusiast
Posts: 159
Joined: Mon Mar 10, 2008 12:07 pm

Re: FCR kit cost

Post by TRiXy » Thu May 26, 2011 9:40 am

I'm keen. I've e-mailed them, but no reply yet :-(
Current Rides:
2010 YZF-R1 - Stock, but still awesome.
1995 Import Spec TRX - Yoshi Pipes & Jet Kit
Top
TRiXy
TRX-Enthusiast
Posts: 159
Joined: Mon Mar 10, 2008 12:07 pm

Re: FCR kit cost

Post by TRiXy » Mon May 30, 2011 12:23 am

I got my reply, and about to place my order.

Anyone else keen on placing an order for the second set?
Current Rides:
2010 YZF-R1 - Stock, but still awesome.
1995 Import Spec TRX - Yoshi Pipes & Jet Kit
Top
Marty Moose
TRX-Enthusiast
Posts: 58
Joined: Sat Apr 09, 2011 1:01 am
Location: Western Australia

Re: FCR kit cost

Post by Marty Moose » Mon May 30, 2011 11:45 am

Mine left the US on the 26th should be here any day i'll post up a how to with pics have not seen one yet.
Top
handsomejackuk
TRX-Enthusiast
Posts: 695
Joined: Thu Jul 03, 2008 8:03 am

Re: FCR kit cost

Post by handsomejackuk » Mon May 30, 2011 12:06 pm

What is a FCR ?

Al..
Top
TRiXy
TRX-Enthusiast
Posts: 159
Joined: Mon Mar 10, 2008 12:07 pm

Re: FCR kit cost

Post by TRiXy » Mon May 30, 2011 1:56 pm

http://tinyurl.com/3dttlsj
Current Rides:
2010 YZF-R1 - Stock, but still awesome.
1995 Import Spec TRX - Yoshi Pipes & Jet Kit
Top
Post Reply

Return to “TRX Mods and Upgrades”