Hi the TRX-Men!
I have purchased on eBay a complete stainless steel exhaust system manufactured by SHARK but unfortunately, one part is missing...
It seems to be a connecting rod, which hold a intermediate tube to the frame, under the engine...
I don't if someone here owns a 2in1 Shark exhaust line...
If someone could send me drawing with measurments/dimensions of this part, I would be very grateful..
Sorry for my poor english speaking..!
Thanks a lot.
Alan
2in1 Shark exhaust line
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
-
Yamaya
- TRX-Enthusiast
- Posts: 5
- Joined: Wed Nov 25, 2009 4:55 pm
- Location: Marseilles - France
-
slow codger
- Site Sponsor
- Posts: 2699
- Joined: Sun Oct 01, 2006 9:35 pm
- Location: The Fens
Re: 2in1 Shark exhaust line
Can you send pictures, as you mention its a 2 into 1 system, maybe then someone on here will recognise it.Dave E
An infiltrator from the dark side!
-
fung
- Site Sponsor
- Posts: 1604
- Joined: Mon Aug 23, 2010 2:00 am
- Location: Gold Coast. South East Queensland.
Re: 2in1 Shark exhaust line
Do you mean this bracket ?
mine has a welded on bracket.
cheers
fung
cheers
fung
You do not have the required permissions to view the files attached to this post.
I WOULD RATHER WEAR OUT THAN RUST
-
Yamaya
- TRX-Enthusiast
- Posts: 5
- Joined: Wed Nov 25, 2009 4:55 pm
- Location: Marseilles - France
Re: 2in1 Shark exhaust line
Hi there!
Thanks for your quick answers !!
Fung : It could be something like that. On mine, there is a bolt to hold the missing part on downpipe tube
But what is the brand of your exhaust?
I will send somes pics to show you how it is supposed to be..or not
Cheers!
Alan
Thanks for your quick answers !!
Fung : It could be something like that. On mine, there is a bolt to hold the missing part on downpipe tube
But what is the brand of your exhaust?
I will send somes pics to show you how it is supposed to be..or not
Cheers!
Alan