R1 shock

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
pjs2k04
TRX-Enthusiast
Posts: 17
Joined: Wed May 04, 2011 4:07 pm

R1 shock

Post by pjs2k04 » Tue Nov 08, 2011 11:39 pm

Hi
I see many fit the shock from the r6.
Is the r1 one the wrong size eg,
http://www.ebay.co.uk/itm/Maxton-rear-s ... 2584wt_922
Any help appreciated.
Thanks!

User avatar
Mincehead
TRX-Enthusiast
Posts: 6345
Joined: Sun Jan 25, 2009 1:40 pm
Location: West Sussex
Contact:

Re: R1 shock

Post by Mincehead » Tue Nov 08, 2011 11:59 pm

I personally do not know if it will fit but the spring rate would almost certainly be too high, that`s why the stock R6 shock is a pretty straightforward swap with one of Kayla`s adaptors. :wink:
You`ll find them on Ebay UK or pm her here.
By the way, I expect that Maxton shock to go for VERY good money, they are some of the best shocks money can buy!
Kayla`s Ebay listing:

http://www.ebay.co.uk/itm/Yamaha-R6-sho ... 3a6c6e8ae7
LOUD PIPES SAVE LIVES

alextrx850
Site Sponsor
Posts: 2149
Joined: Sat Apr 02, 2011 10:36 pm
Location: brisbane AUSTRALIA

Re: R1 shock

Post by alextrx850 » Wed Nov 09, 2011 4:17 am

Wouldnt be able to fit the Kayla lower adapter as the R1 shock has a round base lads,..only hope would be if the length was the same as the trx.
nice shock though

User avatar
Mincehead
TRX-Enthusiast
Posts: 6345
Joined: Sun Jan 25, 2009 1:40 pm
Location: West Sussex
Contact:

Re: R1 shock

Post by Mincehead » Thu Nov 10, 2011 9:26 pm

It went for a very reasonable 256 quid in the end, someone got a real bargain! =D>
LOUD PIPES SAVE LIVES

jjmoto
Site Sponsor
Posts: 383
Joined: Wed Aug 11, 2010 10:50 pm

Re: R1 shock

Post by jjmoto » Thu Nov 10, 2011 10:15 pm

seen in practical sportsbikes that a zx10r shock fits a yzf750 so should fit trx too?

User avatar
Mincehead
TRX-Enthusiast
Posts: 6345
Joined: Sun Jan 25, 2009 1:40 pm
Location: West Sussex
Contact:

Re: R1 shock

Post by Mincehead » Thu Nov 10, 2011 10:21 pm

Indeed it should, cheers for that bit of info. :wink:
Hmmm, it would seem that not ALL ZX10 shocks are the `forked` end type:

http://www.ebay.co.uk/sch/i.html?_from= ... Categories

Must be model specific.
LOUD PIPES SAVE LIVES

jjmoto
Site Sponsor
Posts: 383
Joined: Wed Aug 11, 2010 10:50 pm

Re: R1 shock

Post by jjmoto » Fri Nov 11, 2011 12:12 am

All but the latest model i think, judging by pictures i've seen

User avatar
M.V.
Site Sponsor
Posts: 1509
Joined: Sat Jul 04, 2009 3:23 am
Location: Melbourne, Australia

Re: R1 shock

Post by M.V. » Fri Nov 11, 2011 3:29 am

jjmoto wrote:seen in practical sportsbikes that a zx10r shock fits a yzf750 so should fit trx too?
Interesting...

the 04-05 model appears to have a 10kg/mm spring, according to the Racetech site, that's a little closer than the R6 one for me.

Post Reply