Q for those with both TDM/TRX

Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849

Post Reply
User avatar
Killerwhale
Site Sponsor
Posts: 3797
Joined: Tue Aug 22, 2006 8:41 am
Location: GBG/Sweden
Contact:

Q for those with both TDM/TRX

Post by Killerwhale » Thu Mar 29, 2012 10:41 am

After putting the 900 lump in the trix and doing one a bit faster run in about 17 degrees i noticed it actually runs warmer than the TRX878cc wich in turn ran a lot hotter than standard due to comp and bore.

Have you guy´s with both machine´s noticed any difference in temp on the bikes?

User avatar
fung
Site Sponsor
Posts: 1604
Joined: Mon Aug 23, 2010 2:00 am
Location: Gold Coast. South East Queensland.

Re: Q for those with both TDM/TRX

Post by fung » Thu Mar 29, 2012 11:12 am

my 9er runs hotter than the trx.
I was guessing the smaller has between cylinders or the smaller radiator could be the culprit.
Not so sure now you say yours is a bit toasty.
878s have less between the bores too eh.
Cheers
Fung
:rr:
I WOULD RATHER WEAR OUT THAN RUST

User avatar
Killerwhale
Site Sponsor
Posts: 3797
Joined: Tue Aug 22, 2006 8:41 am
Location: GBG/Sweden
Contact:

Re: Q for those with both TDM/TRX

Post by Killerwhale » Thu Mar 29, 2012 12:18 pm

fung wrote:my 9er runs hotter than the trx.
I was guessing the smaller has between cylinders or the smaller radiator could be the culprit.
Not so sure now you say yours is a bit toasty.
878s have less between the bores too eh.
Cheers
Fung
:rr:
At least less wall between combustion and waterchannels....
Good to know though you 9er is hotter, is it the same type thermostat and placed the same on 9er?

Post Reply