Been thinking and are a bit annoyed about the 4,5 - 5,5k rpm dip i have on the dyno.
Anyone checked when the squirt is coming on the FCR´s? I way back got a tip to cabletie it so the squirt is immediate and i think it actually was better. Now it´s lean going off and then rich in the above rpm.
A direct squirt should be better huh??
My 5,5k rpm hole...squirt?
Moderators: trixynut, Mincehead, dicky, phuk72, Jak, Kevtrx849
- Killerwhale
- Site Sponsor
- Posts: 3797
- Joined: Tue Aug 22, 2006 8:41 am
- Location: GBG/Sweden
- Contact:
-
cobbadiggabuddyblooo
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: My 5,5k rpm hole...squirt?
Oddly enough mine showed up with one around the 4500 mark too cause its annoying its right around 100/110 kmh in top with the 16/40 gearing.. A pain in the butt on the highway
laughter is the best medicine
-
cobbadiggabuddyblooo
- Site Sponsor
- Posts: 6809
- Joined: Thu Aug 28, 2008 9:19 am
- Location: Brisbane,Australia
Re: My 5,5k rpm hole...squirt?
Around 4600 to close to 4800 it actually looses maybe 2 or so h/p before climbing back up again.. It's a nice curve with this one hick-up in the middle
laughter is the best medicine
- Killerwhale
- Site Sponsor
- Posts: 3797
- Joined: Tue Aug 22, 2006 8:41 am
- Location: GBG/Sweden
- Contact:
Re: My 5,5k rpm hole...squirt?
Looking mostly on my A/F and it goes rich at 5k...so i wonder if the squirt comes there now when i have it spring loaded....hmmm.cobbadiggabuddyblooo wrote:Around 4600 to close to 4800 it actually looses maybe 2 or so h/p before climbing back up again.. It's a nice curve with this one hick-up in the middle
- scotsy
- Site Sponsor
- Posts: 49
- Joined: Fri Mar 02, 2012 10:20 pm
- Location: Leigh, Lancashire and work mon-fri in Scotland
Re: My 5,5k rpm hole...squirt?
Killerwhale wrote:Been thinking and are a bit annoyed about the 4,5 - 5,5k rpm dip i have on the dyno.
Anyone checked when the squirt is coming on the FCR´s? I way back got a tip to cabletie it so the squirt is immediate and i think it actually was better. Now it´s lean going off and then rich in the above rpm.
A direct squirt should be better huh??
The FCR-MX carbs can sometimes be fitted with a Merge racing spring mod instead of using an O-ring or safety wiring them together http://www.crfsonly.com/catalog/product ... ts_id/4497
- Killerwhale
- Site Sponsor
- Posts: 3797
- Joined: Tue Aug 22, 2006 8:41 am
- Location: GBG/Sweden
- Contact:
Re: My 5,5k rpm hole...squirt?
Cheers fer that!