My winter overhaul in readiness for the 2010 track, Sunday morning blats and September 10-day sabbatical to the Pyrenees has officially begun!I've just ordered some Samco hoses
Other jobs on the list are:
Valve clearance check/shims as necessary. Mileage is just under 16K currently. Bike will be taken to a mates who is very handy with spanners and he's going to walk me through it so I'll know its been done proper like
Oil and filter change. OE Yam filter, gasket etc and I might try some of their oil too.
New plugs whilst the engines apart and ancilliaries out of the way. What do forum users recommend
Swap out my mates 2003 R1 gold spots for ones that I acquired through the year via the PB mag forum. So that'll be new fluid in the lines
My cans could do with repacking and I might stubby them a smidge in the process. Doubt theres much in them aside from cob webs at the moment
I have some Ohlins springs
Take off the rear caliper and give it a good clean and overhaul if necessary.
Swap over the clip on mounts and see how this mod feels in readiness for the 600 mile haul down to the Pyrenees to my mates house there
That little lot should see the bike more than fit for purpose! Hopefully come the spring I'll be in a position to just ride it in 2010 and avoid the need to waste riding time fettling the old girl!
And before anyone start carping on about not riding all year round
Pictues for this thread as progress occurs will follow for all you picture whores!
Ride safe.
Corners

